# Cone6

> Ribs, trimming profiles, bats, calipers and chucks for the potter's wheel. Five flex grades, printed to the profile you draw. Made to order in Yerevan.

## Pages

- [About Cone6 · Cone6](https://cone6.tools/about/): Ribs, gauges, trims and throwing profiles, printed to the shape you draw. Made in Yerevan for people who already own a wheel. DM a sketch.
- [Cone6 for business. Class sets, and your studio's own profile](https://cone6.tools/business/): Studio tools in quantity for teaching studios, schools and production potters: ribs and trimming tools in class sets, your own profile copied, and the studio name on every handle.
- [A potter's tool as a gift out of Armenia. Cone6](https://cone6.tools/gift/): Armenia has been making pots since the storage jars at Areni and the black burnished ware at Shengavit. A printed studio tool is the newest link in that chain, and it fits flat in a suitcase.
- [Cone6. Studio tools for wheel throwers, made to order in Yerevan](https://cone6.tools/): Ribs, trimming profiles, bats, calipers and chucks for the potter's wheel. Five flex grades, printed to the profile you draw. Made to order in Yerevan.
- [How to order from Cone6. Send a sketch, get a drawing back](https://cone6.tools/order/): Cone6 studio tools are made to order through a direct message to @cone6.tools. What to send, where the tools are made, where they ship, and what comes back before anything is printed.
- [Press kit · Cone6](https://cone6.tools/press/): Marks, colour and usage for Cone6. Everything on this page is generated from the brand system.
- [Wheel bats and trimming chucks. Cone6](https://cone6.tools/products/bats-and-chucks/): Wheel bats drilled to your pin centres and stepped trimming chucks, printed to order in Yerevan for the potter's wheel.
- [Stepped Chuck 60 90 120. Cone6](https://cone6.tools/products/bats-and-chucks/stepped-chuck-60-90-120/): Three concentric seats at 60, 90 and 120 mm hold a bottle, a vase or a narrow-mouthed jar upside down while you trim it.
- [Wheel Bat 300. Cone6](https://cone6.tools/products/bats-and-chucks/wheel-bat-300/): A bat you can lift a wet, wide bowl off the wheel on without putting a thumb through the rim.
- [Caliper Gauge 220. Cone6](https://cone6.tools/products/gauges-and-calipers/caliper-gauge-220/): Set the gallery, flip the caliper, and the lid that matches it is the other end of the same tool.
- [Calipers and throwing gauges. Cone6](https://cone6.tools/products/gauges-and-calipers/): Potter's calipers and repeat height gauges, printed with the scale in the tool rather than stuck on it. Made to order in Yerevan.
- [Repeat Height Stop. Cone6](https://cone6.tools/products/gauges-and-calipers/repeat-height-stop/): Clamp it to the rim of the splash pan, set the pointer to the first good pot, and every one after it comes up to the same place.
- [Products. Studio tools for the wheel, made to order. Cone6](https://cone6.tools/products/): Ribs, profiles, bats, chucks, calipers and gauges for the potter's wheel, printed to your profile and your flex grade in Yerevan.
- [Ribs and throwing profiles. Cone6](https://cone6.tools/products/ribs-and-profiles/): Throwing ribs and trimming profiles for the wheel, printed to a stated radius in five flex grades. Made to order in Yerevan.
- [Throwing Rib R60. Cone6](https://cone6.tools/products/ribs-and-profiles/throwing-rib-r60/): The rib most throwers reach for first, and the one that decides whether a cylinder comes up straight or bellied.
- [Trimming Profile 45. Cone6](https://cone6.tools/products/ribs-and-profiles/trimming-profile-45/): A hard, flat profile for the moment the pot is upside down and the foot has to arrive somewhere specific.

## Optional

- [Short guide](https://cone6.tools/llms-small.txt)
- [Full text](https://cone6.tools/llms-full.txt)