CT-240
Caliper Gauge 220
Double ended. Reads inside and outside off one pivot.
- Size
- 310 × 74 × 6.0 mm
- Also
- Reads 0 to 220 mm, graduated at 1 mm and numbered at 10 mm
- Material
- PA12 nylon, sintered
Calipers closing on a still-wet rim, a row of finished cups behind at the same height.
Products · Gauges and calipers
Repeat work, without holding the number in your head.
Calipers that read inside and outside off one pivot, and stops that sit on the wheel so the tenth cup arrives at the height of the first.
CT-GA-210
Repeat Height Stop
A pointer that clamps to the splash pan, so the tenth cup is the height of the first.
- Size
- 210 × 60 × 40 mm
- Also
- Pointer travels 40 to 300 mm above the wheel head
- Fits
- Splash pan rims to 26 mm thick
The scale is printed into the tool rather than stuck onto it, so a wet thumb cannot lift it and a year of studio life cannot rub it off.
Every number here is off the drawing rather than off a finished tool. Name the radius and the grade you want and the drawing comes back with your numbers on it.
Made to order
Make one that fits your hand.
Send the code and the grade, or a photograph of the curve you want. A dimensioned drawing comes back the same working day, and nothing is printed until you say yes to it.