CT-104
Throwing Rib R60
A 60 mm convex curve for pulling an even wall on a cylinder.
- Size
- 118 × 62 × 4.0 mm
- Also
- R60 convex face, R25 shoulder, 18 degree single-sided bevel
- Flex grades
- 1 ultra soft, 2 soft, 3 medium, 4 firm, 5 hard
A wheel mid-pull. Wet hands, a rib riding the wall of a cylinder, slip running off the trailing edge.
Products · Ribs and profiles
Ribs that match the pot you actually throw.
A rib flatter than your cylinder fights you at the shoulder. These are cut to a stated radius, in the flex grade you ask for, and the profile can be traced off a pot you already own.
CT-118
Trimming Profile 45
A straight 45 degree face for cutting a foot ring in leather-hard clay.
- Size
- 96 × 48 × 3.2 mm
- Also
- 45 degree flat face, 2 mm land, 30 degree single-sided bevel
- Flex grades
- 4 firm, 5 hard
The grade is part of the tool, not a colour option. A rib in Grade 3 and the same rib in Grade 5 do different jobs, and both carry the grade printed on the tool and written on the invoice.
Send a photograph of a curve against a ruler and the profile comes back dimensioned to approve. Approved drawings stay on file under your name, so a second one is a reorder rather than a conversation.
Every number here is off the drawing rather than off a finished tool. Name the radius and the grade you want and the drawing comes back with your numbers on it.
Made to order
Make one that fits your hand.
Send the code and the grade, or a photograph of the curve you want. A dimensioned drawing comes back the same working day, and nothing is printed until you say yes to it.