CT-206
Wheel Bat 300
300 mm, ribbed underside, drilled to your pin centres.
- Size
- 300 mm across, 11 mm tall
- Also
- Flat to within 0.20 mm across the face
- Fits
- Standard two-pin wheel head. Drilled to your centres, 10 mm bore as drawn
A bat lifted off the wheel head with a wet bowl still standing on it, both hands under the rim.
Products · Bats and chucks
The pot comes off the wheel without being touched.
Bats drilled to your pin centres and chucks seated to your rims, so a wet pot leaves the wheel flat and a leather-hard one goes back on it true.
CT-312
Stepped Chuck 60 90 120
Three seats in one body, so trimming a rim needs no coil of clay.
- Size
- 146 mm across, 92 mm tall
- Also
- 3.6 mm wall, 6 mm at the seats
- Seats
- 60 mm, 90 mm, 120 mm
Pin centres vary by wheel and by decade. Measure yours centre to centre, send the number, and the bat is drilled to it rather than to a standard that your wheel may never have followed.
Every number here is off the drawing rather than off a finished tool. Name the radius and the grade you want and the drawing comes back with your numbers on it.
Made to order
Make one that fits your hand.
Send the code and the grade, or a photograph of the curve you want. A dimensioned drawing comes back the same working day, and nothing is printed until you say yes to it.